Wastewater treatment equipment handles the used liquids generated by washing and rinsing operations. Jietai’s range includes reverse osmosis membrane equipment, industrial wastewater treatment systems and equipment listed for treatment volumes up to forty tonnes per day. The appropriate arrangement depends on the water stream, daily volume and the quality required for reuse or discharge.Cleaning wastewater can contain machining contamination, spent cutting fluid or constituents from chemical and electroplating processes. These streams should be identified individually when specifying industrial water treatment systems. A membrane recovery stage is one option in the listed range, but the treatment sequence must be selected for the actual effluent. A nominal capacity alone does not establish whether a unit suits a particular wastewater composition.The reverse osmosis membrane equipment can be considered when planning water recovery. Where treated water is intended to return to a rinse, define the quality required at that stage. Preparation of fresh final-rinse water is addressed separately by industrial reverse osmosis systems, including RO and EDI arrangements.Start an enquiry with the source of each wastewater stream, its measured or expected daily volume, available water-analysis information and the intended outlet. Include the local discharge requirements when discharge is planned, or the rinse-water requirement when reuse is planned. For a new industrial ultrasonic cleaning line, considering the water loop during equipment selection helps define both the cleaning process and the treatment duty.